Powermatic WP2510 Bedienungsanleitung PDF herunterladen (Seite 29)

9. Set Linear Correction

NOTE: Setting Linear Correction should be done in MM (metric) mode, not inches. This will ensure

accurate readings for table movement.

Step 1: Press

Display

Step 2: Enter the value between 0.0001 and 9.9999

Step 3: Press

to confirm or press

to clear.

10. Enter Parameter Setttings Mode

With this function, you can select each parameter to be locked or unlocked. When a

parameter is locked, then the end-user can only see the value, but can not change it.

Step 1: Press

Display

Step 2: Enter the password.

Step 3: Use

to scroll through the parameters.

Step 4: Press

to lock or unlock.

On = unlock

Off = lock

Step 5: Press

to confirm or press

to clear.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 55 56

Keine Kommentare

Powermatic WP2510 Bedienungsanleitung Seite 29